Rendered at 17:57:30 GMT+0000 (Coordinated Universal Time) with Cloudflare Workers.
Neywiny 1 days ago [-]
This is an interesting part because it seems to fit a niche, yet TI doesn't support it much. One forum post said the support team for the part moved on. Another said the next gen part is EOL and there's nothing to replace it. It's one of those parts they have that you can tell they really don't want to have. At least linear tech (now ADI) has some equivalent one? The LTC1060. Unlike some others where TI is literally the only one, like the TUSB1310/A.
kens 2 days ago [-]
Author here for your filter questions...
geerlingguy 2 days ago [-]
As a noob to chip design, I've always wondered; why can't chip packages integrate filter caps at the outputs directly? Instead of having boards put a ton of them on the PCB as close to the chip connections as possible?
Is it a matter of current handling? Or repairability (easier to replace one external smoked cap than a whole IC...)?
(I know the filtering here is a little different in purpose, but it just made me wonder).
rcxdude 2 days ago [-]
Some can (see modern CPUs which have a huge chunk of them integrated into the package). It's likely to be quite expensive for most packaging processes and realistically for a lot of them there isn't really enough space. (on older style DIP packages there might be enough space for some of the modern smaller caps but the caps available at the time would not fit).
With on-die capacitance you can't realistically get enough capacitance for decoupling in the right frequency range (though it is still relevant: in practice decoupling is a case of multiple overlapping filters, from the response of the regulator itself, to any bulk capacitance, to local decoupling capacitors on the PCB, to the plane capacitance of the PCB itself, to the capacitance of the power distribution inside the IC. Each of these stages has a lower inductance but also a correspondingly lower capacitance and so deals with a higher-frequency part of the load).
kens 2 days ago [-]
On-chip decoupling capacitors do get used [1]. The main problem is that they take up a lot of valuable die space for not much capacitance.
Is it a matter of current handling? Or repairability (easier to replace one external smoked cap than a whole IC...)?
(I know the filtering here is a little different in purpose, but it just made me wonder).
With on-die capacitance you can't realistically get enough capacitance for decoupling in the right frequency range (though it is still relevant: in practice decoupling is a case of multiple overlapping filters, from the response of the regulator itself, to any bulk capacitance, to local decoupling capacitors on the PCB, to the plane capacitance of the PCB itself, to the capacitance of the power distribution inside the IC. Each of these stages has a lower inductance but also a correspondingly lower capacitance and so deals with a higher-frequency part of the load).
[1] https://doi.org/10.1109/SBCCI.2003.1232837
In my case I was trying to find a 'D1-15531-9' when the actual part number is 'HD1-15531-9'
Someone in their marketing thought they were being cool back then, but it's just confusing.